Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. M8-D
  4. M8 Male cable connector, Contacts: 4, shielded, moulded on the cable, IP67, Profinet/Ethernet CAT5e, PUR, green, 4 x AWG 22, 2 m
Part no.: 77 5429 0000 50704-0200

M8 Male cable connector, Contacts: 4, shielded, moulded on the cable, IP67, Profinet/Ethernet CAT5e, PUR, green, 4 x AWG 22, 2 m

M8-D, series 818, Automation Technology - Data Transmission
(Standard 2 m and 5 m. Other lengths are available on request.)
Compare product
Downloads
General features
Moreless
Part no. 77 5429 0000 50704-0200
Connector design Male cable connector
Type standard DIN EN 61076-2-114
Cable length 2 m (Standard 2 m and 5 m. Other lengths are available on request.)
Version Connector pin straight
Connector locking system M8x1
Termination moulded on the cable
Degree of protection IP67
Cross-sectional area 0.34 mm² / AWG 22
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 100 Mating cycles
Weight (g) 130.00
Customs tariff number 85444290
Country of Origin DE
Rated voltage 63 V
Rated impulse voltage 1500 V
Rated current 4.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group I
EMC compliance shielded
Shield connection Shield on the threaded ring
Contact body material PUR black
Contact material CuZn (brass)
Contact plating Au (gold)
Locking material CuZn (brass)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 4182f23a-980d-4022-8f60-cdde6dd0bb79
eCl@ss 11.1 27-06-03-11
ETIM 9.0 EC002638
RoHS Directive 2011/65/EU (EN 50581:2012)
Cable data
Moreless
Structure of the cable
Cable type Profinet/Ethernet CAT5e
Cable diameter 6.7 mm
Cross section 4 x AWG 22
Sheath material PUR
Single-lead insulation Polyolefin
Cable color green
Electrical properties
Conductor resistance 55 Ω/Km (20°C)
Mechanical properties
Bending radius, fixed cable ≥ 5 x Ø
Bending radius, moving cable ≥ 15 x Ø
Bending cycles 2 million
Permitted acceleration max. 2 m/s²
Travel distance, horizontal max. 5 m
Travel distance, vertical max. 5 m
Travel speed 200 m/min
Thermal properties
Temperature range cable in move from/to -20 °C / 60 °C
Temperature range cable fixed from/to -40 °C / 80 °C
Other features
Halogen free yes
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
  4. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  5. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  6. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  7. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  8. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 40 cNm).
Downloads
Data sheet
Data sheet 77 5429 0000 50704-0200
PDF
REACH
77 5429 0000 50704-0200
PDF
RoHS
77 5429 0000 50704-0200
PDF
China RoHS
77 5429 0000 50704-0200
PDF
Declaration of conformity, RoHS Directive
Declaration of conformity
RoHS Directive
PDF
UKCA declaration of conformity, UK-RoHS
UKCA declaration of conformity
UK-RoHS
PDF
CAD files
Select required format
M8-D
77 5429 0000 50704-0200