99 0773 000 08 | binder Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67

Menu

Menu

Products
Miniature connectors
Bayonet NCC
Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67

Illustration 99 0773 000 08 - Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67 — Illustration

3D View 99 0773 000 08 - Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67 — 3D View

Scale drawing 99 0773 000 08 - Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67 — Scale drawing

Assembly instructions 99 0773 000 08 - Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67 — Assembly instructions

Contact arrangement (Plug-in side) 99 0773 000 08 - Bayonet Male angled connector, Contacts: 8, 2.5-4.0 mm, unshielded, solder, IP67 — Contact arrangement (Plug-in side)

Part no.	99 0773 000 08
Connector design	Male angled connector
Version	Connector pin straight
Connector locking system	Bayonet
Termination	solder
Degree of protection	IP67
Cross-sectional area	0.25 mm² / AWG 24
Cable outlet	2.5-4.0 mm
Temperature range from/to	-25 °C / 85 °C
Mechanical operation	> 5000 Mating cycles
Weight (g)	13.09
Customs tariff number	85369010
Country of Origin	DE

Rated voltage	175 V
Rated impulse voltage	1750 V
Rated current	2.0 A
Insulation resistance	≥ 10¹⁰ Ω
Pollution degree	2
Overvoltage category	II
Insulating material group	II
EMC compliance	unshielded

Housing material	PA
Contact body material	PA (UL94 HB)
Contact material	CuZn (brass)
Contact plating	Au (gold)
REACH SVHC	CAS 7439-92-1 (Lead)
SCIP number	9607ab5d-63b0-4e32-935d-905d4a4e0146

eCl@ss 11.1	27-44-01-02
ETIM 9.0	EC002635

Report error on this page

Security notices

The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".

Downloads

Data sheet 99 0773 000 08

CAD files

Select required format