Menu
Back
  1. Products
  2. Automation technology - Data transmission
  3. M12-B
  4. M12 Male angled panel mount connector, Contacts: 5, unshielded, THR, IP67, UL, two-part design
Part no.: 99 4445 202 05

M12 Male angled panel mount connector, Contacts: 5, unshielded, THR, IP67, UL, two-part design

M12-B, series 766, Automation Technology - Data Transmission
Compare product
Downloads
General features
Moreless
Part no. 99 4445 202 05
Connector design Male angled panel mount connector
Type standard DIN EN 61076-2-101
Version Connector pin angled
Connector locking system screw
Termination THR
Degree of protection IP67
Temperature range from/to -40 °C / 85 °C
Mechanical operation > 100 Mating cycles
Additional information two-part design
Weight (g) 8.47
Customs tariff number 85369010
Country of Origin DE
Rated voltage 60 V
Rated impulse voltage 1500 V
Rated current 4.0 A
Insulation resistance > 108 Ω
Pollution degree 3
Overvoltage category II
Insulating material group II
EMC compliance unshielded
Housing material CuZn (Brass nickel plated)
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
SCIP number 9938f22e-13fb-444f-84d9-7dd758926c52
eCl@ss 11.1 27-44-01-02
ETIM 9.0 EC002635
Security notices
  1. The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
  2. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
  3. Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
  4. The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
  5. Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
  6. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
  7. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 60 cNm).
M12-B
99 4445 202 05