Číslo položky: 79 9157 120 05
Snap-In Zástrčka kabelu, : 5, nestíněný, vylisované na kabelu, IP67, VDE, PUR, černá, 5 x 0,75 mm², 2 m
Snap-In IP67, Série 720, Miniaturní konektory
Obecné vlastnosti
víceméně| Díl č. | 79 9157 120 05 |
| Konstrukce konektoru | Zástrčka kabelu |
| Délka kabelu | 2 m (Standard 2 m a 5 m. Další délky jsou k dispozici na vyžádání). |
| Ukončení | vylisované na kabelu |
| Stupeň ochrany 1 | IP67 |
| Průřez přípojky | 0,75 mm² / AWG 18 |
| Hmotnost (gr) | 220.00 |
| Číslo celního sazebníku | 85444290 |
| Země původu | DE |
Elektrické parametry
víceméně| Jmenovité napětí | 125 V |
| Jmenovité impulzní napětí | 1500 V |
| Jmenovitý proud | 5,0 A |
| Izolační odpor | ≥ 1010 Ω |
| Stupeň znečištění | 2 |
| Kategorie přepětí | II |
| Skupina materiálů | II |
| Soulad s EMV | nestíněný |
| Napětí | 1750 V DC |
Materiál
víceméně| Materiál pouzdra | PUR |
| Materiál kontaktního tělesa | PA (UL94 V-0) černá |
| Materiál kontaktu | CuZn (mosaz) |
| Pokovení kontaktů | Au (zlato) |
| REACH SVHC |
CAS 7439-92-1 (Lead) |
| SCIP číslo | 87e0ba55-2c52-493e-b94e-26d46ff18137 |
Údaje o kabelu
víceméně| Struktura kabelu | |
| Průměr kabelu | 8,2 mm |
| Průřez | 5 x 0,75 mm² |
| Typ pláště kabelu | PUR |
| Izolace jednoho vodiče | EPK |
| Barva kabelu | černá |
| Elektrické vlastnosti | |
| Odpor vodiče | 26.7 Ω/Km (20°C) |
| Mechanické vlastnosti | |
| Poloměr ohybu kabelu pevný | ≥ 5 x Ø |
| Poloměr ohybu kabelu pohyblivý | ≥ 10 x Ø |
| Tepelné vlastnosti | |
| Teplotní rozsah kabelu v pohybu od/do | -30 °C / 90 °C |
| Pevný kabel s teplotním rozsahem od/do | -40 °C / 90 °C |
| Další funkce | |
| Bez halogenů | ano |
Autorizace/schválení
víceméně| Schválení | VDE |
Klasifikace
víceméně| eCl@ss 11.1 | 27-06-03-11 |
| ETIM 9.0 | EC002638 |
Bezpečnostní upozornění
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Stahování
Datový list
Datový list 79 9157 120 05
stáhnout
Certifikát
Certifikát VDE
stáhnout
REACH
79 9157 120 05
stáhnout
RoHS
79 9157 120 05
stáhnout
China RoHS
79 9157 120 05
stáhnout
Ověření pro stažení
Pro pokračování stažení CAD dokončete prosím ověření.
Soubory CAD
Vyberte požadovaný formát


