Part no.: 79 9723 050 08
M12/M12 Connecting cable male cable connector - RJ45 connector, Contacts: 8, shielded, moulded on the cable, IP67, UL, PUR, green, AWG 26/7, 5 m
M12-X, series 876, Automation Technology - Data Transmission
General features
MorelessPart no. | 79 9723 050 08 |
Connector design | Connecting cable male cable connector - RJ45 connector |
Type standard | DIN EN 61076-2-109 |
Cable length | 5 m (Other lengths are available on request.) |
Version | Connecting cable |
Connector locking system | screw |
Termination | moulded on the cable |
Degree of protection |
IP67 IP20 |
Cross-sectional area | AWG 26/7 |
Temperature range from/to | -40 °C / 85 °C |
Mechanical operation | > 100 Mating cycles |
Weight (g) | 230.00 |
Customs tariff number | 85444290 |
Country of Origin | DE |
Electrical parameters
MorelessRated voltage | 50 V (AC) / 60 V (DC) |
Rated current | 0.5 A |
Insulation resistance | > 108 Ω |
Pollution degree | 3 |
Transmission rate | CAT 6A |
Overvoltage category | II |
Insulating material group | II |
EMC compliance | shielded |
Shield connection | Shield on the threaded ring |
Material
MorelessHousing material | PUR |
Contact body material | PA |
Contact material | CuZn (brass) |
Contact plating | Au (gold) |
Locking material | Zinc die-cast nickel-plated |
REACH SVHC |
CAS 7439-92-1 (Lead) |
SCIP number | e1c49c97-9fc4-4a10-9959-28fed38aad31 |
Authorization/approvals
MorelessApprovals | UL |
Classifications
MorelesseCl@ss 11.1 | 27-06-03-11 |
ETIM 9.0 | EC002638 |
Declarations of conformity
MorelessRoHS Directive | 2011/65/EU (EN 50581:2012) |
Cable data
MorelessStructure of the cable | |
Cable diameter | 6.2 mm |
Cross section | AWG 26/7 |
Sheath material | PUR |
Single-lead insulation | PE |
Single-lead structure | 8 x 0.14 mm |
Cable color | green |
Mechanical properties | |
Bending radius, fixed cable | ≥ 8 x Ø |
Thermal properties | |
Temperature range cable in move from/to | -10 °C / 60 °C |
Temperature range cable fixed from/to | -40 °C / 85 °C |
Other features | |
Halogen free | yes |
Security notices
- The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury.
- The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application.
- Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards.
- The user must take suitable safety precautions to ensure that the connector cannot be accidentally disconnected.
- Plug connectors with enclosure protection IP67 and IP68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre.
- The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information".
Downloads