Menu
Part no.
Productrequest
Menu
ll_Close
Part no.
Productrequest
Wird geladen...
binder AUSTRIA
... show all
Angled Connectors
Filter products
Connector type
The connector type can be used to distinguish our products for installation in a device housing from cable parts. The connector type describes the difference between connectors that are mounted on enclosures, connectors that are mounted on cables, and other connection componentsdistributing signal and power.
Number of contacts
This indicates the number of contacts the connector has.
Gender
A connector consists of the male part (pin) and the female part (socket). Depending on the design, the male or female part is either permanently installed or are located at the end of a cable.
Locking Type
The locking system describes how the pin and socket elements are joined.
Termination
The termination type determines how cables, single wires or PCBs can be joined with the connector.
Coding
The connector elements, pin and socket, must be brought into form-fitting alignment with one another (coding) before locking. This prevents mismating.
Shielded Option
Electromagnetic compatibility (EMC) means that a connector is shielded or shieldable. This is required when it is necessary to protect the signals or data conducted by the connector, as well as to protect external devices, from disturbance due to electromagnetic effects.
IP-Rating
The degrees of protection according to IEC60529 apply to various articles and provide information on protection against the intrusion of water and solids such as dust.
Material of housing
Depending on the area of application or requirements, connectors are made of different materials. We offer metal and plastic housings for our items as the housing material.
Approval
Our articles have various approvals which can be preselected here. can be preselected here.
Rated current
The rated current is the electrical current that is assigned to the connector.
Rated voltage
The rated voltage is the electrical voltage assigned to the connector.
Locking material
Depending on the technical requirements or performance data of the connector, the locking mechanism is made of plastic or metal.
Cable length
Our items with molded or pre-assembled cables have different cable lengths. It describes the length of the cable from the end of the connector. If the desired cable length is not included, please contact our sales department.
Cable type
By selecting the cable type, a preselection for the respective application can be carried out.
Cable Jacket Type
The material of the cable jacket. PUR, TPE, TMPU or TPE-U cables each have different technical properties.
Cable color
The color of the cable jacket.
Industry
The most important sectors recommended for the requirements, standards and typical applications of the corresponding binder articles.
Mounting orientation
The mounting orientation for flange connectors defines the side from which an item can be mounted.
Mounting thread
There are different thread sizes for the device-side connection, depending on the design. These are available in different variants.
Cross section
The connection cross-section defines the possible size of a stranded wire on a contact in the flange or field attachable connector. Cross-sections from 0.08mm² to 6.0mm² are possible here. Since various industry are also using wires according to the American Wire Gauge (AWG), both units are reflected.
Cable outlet
Field attachable connectors can be assembled with different cables. The cable aperture indicates the possible cable diameters that can be used on an article.
Series
The series indicates the product category of binder circular connectors and serves as a guide for selection.
Contact Plating
The contact surface refers to the plating of the contacts (e.g., gold or silver) and affects conductivity, corrosion resistance, and the service life of the circular connector.
Show products

Angled Connectors

Angled connectors provide a compact solution for industrial setups where space is limited. Their design allows precise connections without excessive bending, reducing cable stress and improving system longevity.


What defines angled connectors


These connectors are characterized by a 90° or custom-angled design that facilitates installation in tight or complex spaces. They improve cable management, prevent mechanical strain, and can simplify maintenance and panel layouts.


Using angled connectors strategically can significantly optimize equipment footprints. They are especially beneficial in control panels, robotics, and production machinery where cable routing is constrained and efficiency is critical.


Advantages of angled connectors in industrial applications


• Optimized installation in tight spaces 
• Reduced mechanical stress on cables 
• Simplified maintenance and panel layout 
• Flexibility for complex system designs

Frequently Asked Questions about angled connectors (FAQ)


What are angled connectors?


Connectors with an angled design (usually 90°) that route the cable to the side, saving space and simplifying cable management.


When are angled connectors used?


In confined installation spaces or complex cable routing where a straight connector would require too much height.


What advantages do angled connectors offer?


Lower installation height, relieved cable routing without tight bend radii, and easier integration into control cabinets and machinery.


Are angled connectors suitable for tight installation spaces?


Yes, they are specifically designed for compact installation environments.


What is the difference between angled and straight connectors?


Angled connectors route the cable at an angle (usually 90°), straight connectors follow a direct axial path. The choice depends on available space and cable routing.

+43 1 616 15 53 275 Contact form